View HA1630Q03T_1594158.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

rev.1.00 mar 10, 2006 page 1 of 23 ha1630q01/02/03 series low voltage operation cmos quad operational amplifier rej03d0802-0100 rev.1.00 mar 10, 2006 description the ha1630q01/02/03 are dual cmos operational amplifiers realizing low voltage operation, low input offset voltage and low supply current. in addition to a low operating voltage from 1.8v, these device output can achieve full swing output voltage capability extending to either supply. available in an ultra-small tssop-14 package that occupies only 1/2 the area of the sop-14 package. features ? low power and single supply operation v dd = 1.8 to 5.5 v ? low input offset voltage v io = 4.0 mv max ? low supply current (per channel) i dd = 15 a typ (ha1630q01) i dd = 50 a typ (ha1630q02) i dd = 100 a typ (ha1630q03) ? maximum output voltage v oh = 2.9 v min (at v dd = 3.0 v) ? low input bias current i ib = 1 pa typ ordering information type no. package name package code ha1630q01t ttp-14d ptsp0014ja-b ha1630q02t ttp-14d ptsp0014ja-b HA1630Q03T ttp-14d ptsp0014ja-b
ha1630q01/02/03 series rev.1.00 mar 10, 2006 page 2 of 23 pin arrangement v out4 v in4(?) v in4(+) v ss v out1 v in1(?) v in1(+) v dd 14 13 11 12 1 2 4 3 v in3(+) v in3(?) v out3 v in2(+) v in2(?) v out2 10 9 8 5 6 7 ? + ? + ? + ? + equivalent circuit (per one channel) v dd v ss v in(+) v in(?) v out
ha1630q01/02/03 series rev.1.00 mar 10, 2006 page 3 of 23 absolute maximum ratings (ta = 25c) items symbol ratings unit note supply voltage v dd 7 v differential input voltage v in(diff) ?v dd to +v dd v input voltage v in ?0.3 to +v dd v 1 power dissipation p t 400 mw operating temp. range topr ?40 to +85 c storage temp. range tstg ?55 to +125 c note: 1. do not apply input voltage exceeding v dd or 7 v. electrical characteristics (v dd = 3.0 v, ta = 25c) items symbol min typ max unit test condition input offset voltage v io ? ? 4.0 mv vin = 1.5 v input offset current i io ? (1.0) ? pa vin = 1.5 v input bias current i ib ? (1.0) ? pa vin = 1.5 v output high voltage v oh 2.9 ? ? v r l = 1 m ? 6 12 ? v oh = 2.5 v (ha1630q01) 25 50 ? v oh = 2.5 v (ha1630q02) output source current i o source 50 100 ? a v oh = 2.5 v (ha1630q03) output low voltage v ol ? ? 0.1 v r l = 1 m ? ? (0.8) ? v ol = 0.5 v (ha1630q01) ? (1.0) ? v ol = 0.5 v (ha1630q02) output sink current i o sink ? (1.2) ? ma v ol = 0.5 v (ha1630q03) common mode input voltage range v cm ?0.1 to 2.1 ? ? v ? (0.125) ? c l = 20 pf (ha1630q01) ? (0.50) ? c l = 20 pf (ha1630q02) slew rate sr ? (1.00) ? v/ s c l = 20 pf (ha1630q03) voltage gain a v 60 80 ? db ? (200) ? c l = 20 pf (ha1630q01) ? (680) ? c l = 20 pf (ha1630q02) gain bandwidth product bw ? (1200) ? khz c l = 20 pf (ha1630q03) power supply rejection ratio psrr 60 80 ? db common mode rejection ratio cmrr 60 80 ? db ? 60 120 r l = (ha1630q01) ? 200 400 r l = (ha1630q02) supply current i dd ? 400 800 a r l = (ha1630q03) note: 1. ( ) : design specification
ha1630q01/02/03 series rev.1.00 mar 10, 2006 page 4 of 23 table of graphs electrical characteristics ha1630q01 figure ha1630q02 figure ha1630q03 figure test circuit vs supply voltage 1-1 2-1 3-1 supply current i dd vs ambient temperature 1-2 2-2 3-2 2 vs output source current 1-3 2-3 3-3 output high voltage v oh vs supply voltage 1-4 2-4 3-4 4 output source current i o source vs ambient temperature 1-5 2-5 3-5 6 output low voltage v ol vs output sink current 1-6 2-6 3-6 5 output sink current i o sink vs ambient temperature 1-7 2-7 3-7 6 distribution 1-8 2-8 3-8 vs supply voltage 1-9 2-9 3-9 input offset voltage v io vs ambient temperature 1-10 2-10 3-10 1 common mode input voltage range v cm vs ambient temperature 1-11 2-11 3-11 7 power supply rejection ratio psrr vs frequency 1-12 2-12 3-12 1 common mode rejection ratio cmrr vs frequency 1-13 2-13 3-13 7 voltage gain & phase angle a v vs frequency 1-14 2-14 3-14 10 vs ambient temperature 1-15 2-15 3-15 input bias current i ib vs input voltage 1-16 2-16 3-16 3 slew rate (rising) srr vs ambient temperature 1-17 2-17 3-17 slew rate (falling) srf vs ambient temperature 1-18 2-18 3-18 large signal transient response 1-19 2-19 3-19 slew rate small signal transient response 1-20 2-20 3-20 9 (0 db) vs. output voltage p-p ? 2-21 3-21 total harmonic distortion + noise (40 db) vs. output voltage p-p ? 2-22 3-22 maximum p-p output voltage vs frequency 1-21 2-23 3-23 8 voltage noise density vs frequency 1-22 2-24 3-24
ha1630q01/02/03 series rev.1.00 mar 10, 2006 page 5 of 23 main characteristics (ha1630q01) figure 1-1. ha1630q01 supply current vs. supply voltage 0 10 20 30 40 50 123456 supply voltage v dd (v) supply current i dd ( a) figure 1-3. ha1630q01 output high voltage vs. output source current 0 1 2 3 4 5 6 0 5 10 15 20 output source current i osource ( a) output high voltage v oh (v) v dd = 5.5 v v dd = 3.0 v v dd = 1.8 v ta = 25 c ta = 25 c v dd = 5.0 v v dd = 3.0 v v dd = 1.8 v figure 1-5. ha1630q01 output source current vs. ambient temperature 0 10 20 30 40 50 ? 40 ? 20 0 20 40 60 80 100 ambient temperature ta ( c) output source current i osource ( a) figure 1-2. ha1630q01 supply current vs. ambient temperature 0 10 20 30 40 50 ? 40 ? 20 0 20 40 60 80 100 ambient temperature ta ( c) supply current i dd ( a) v dd = 5.0 v v dd = 3.0 v v dd = 1.8 v r l = 1 m ? r l = 510 k ? ta = 25 c figure 1-4. ha1630q01 output high voltage vs. supply voltage 1 2 3 4 5 6 123456 supply voltage v dd (v) output high voltage v oh (v)
ha1630q01/02/03 series rev.1.00 mar 10, 2006 page 6 of 23 figure 1-6. ha1630q01 output low voltage vs. output sink current 0 0.5 1.0 1.5 2.0 0 0.5 1.0 output sink current i osink (ma) output low voltage v ol (v) v dd = 5.0 v v dd = 3.0 v v dd = 3.0 v v dd = 1.8 v figure 1-8. ha1630q01 input offset voltage distribution 0 10 20 30 40 50 ? 4 ? 3 ? 2 ? 10 1 2 3 4 input offset voltage v io (mv) percentage (%) figure 1-10. ha1630q01 input offset voltage vs. ambient temperature ? 4 ? 3 ? 2 ? 1 0 1 2 3 4 ? 40 ? 20 0 20 40 60 80 100 ambient temperature ta ( c) input offset voltage v io (mv) v dd = 5.0 v, v in = 2.5 v v dd = 1.8 v, v in = 0.9 v v dd = 3.0 v, v in = 1.5 v figure 1-7. ha1630q01 output sink current vs. ambient temperature 0 0.5 1.0 1.5 2.0 ? 40 ? 20 0 20 40 60 80 100 ambient temperature ta ( c) output sink current i osink (ma) v dd = 5.0 v v dd = 3.0 v v dd = 1.8 v figure 1-9. ha1630q01 input offset voltage vs. supply voltage ? 4 ? 3 ? 2 ? 1 0 1 2 3 4 123456 supply voltage v dd (v) input offset voltage v io (mv) ta = 25 c v in = 0.5 v figure 1-11. ha1630q01 common mode input voltage vs. ambient temperature ? 1.0 0 1.0 2.0 3.0 ? 40 ? 20 0 20 40 60 80 100 ambient temperature ta ( c) common mode input voltage v cm (v) ta = 25 c v dd = 3.0 v
ha1630q01/02/03 series rev.1.00 mar 10, 2006 page 7 of 23 figure 1-14. ha1630q01 open loop voltage gain and phase angle vs. frequency ? 40 ? 20 0 20 40 60 80 100 frequency f (hz) open loop voltage gain a vol (db) ? 90 ? 45 0 45 90 135 180 225 phase angle (deg) open loop voltage gain phase angle figure 1-13. ha1630q01 common mode rejection ratio vs. frequency 0 20 40 60 80 100 120 frequency f (hz) common mode rejection ratio cmrr (db) figure 1-12. ha1630q01 power supply rejection ratio vs. frequency 0 20 40 60 80 100 120 10 100 1k 10k 100k 1m 10 100 1k 10k 100k 1m 10 100 1k 10k 100k 1m frequency f (hz) power supply rejection ratio psrr (db) ta = 25 c v dd = 3.0 v r l = 1 m ? c l = 20 pf ta = 25 c v dd = 3.0 v r l = 1 m ? c l = 20 pf ta = 25 c v dd = 3.0 v r l = 1 m ? c l = 20 pf phase margin: 50 deg
ha1630q01/02/03 series rev.1.00 mar 10, 2006 page 8 of 23 figure 1-15. ha1630q01 input bias current vs. ambient temperature ? 200 ? 100 0 100 200 ? 40 ? 20 0 20 40 60 80 100 ambient temperature ta ( c) input bias current i ib (pa) figure 1-16. ha1630q01 input bias current vs. input voltage ? 200 ? 100 0 100 200 0 0.5 1.0 1.5 2.0 2.5 3.0 input voltage v in (v) input bias current i ib (pa) figure 1-20. ha1630q01 small signal transient response figure 1-19. ha1630q01 large signal transient response figure 1-17. ha1630q01 slew rate (rising) vs. ambient temperature 0 0.05 0.10 0.15 0.20 ? 40 ? 20 0 20 40 60 80 100 ambient temperature ta ( c) slew rate srr (v/ s) figure 1-18. ha1630q01 slew rate (falling) vs. ambient temperature 0 0.05 0.10 0.15 0.20 ? 40 ? 20 0 20 40 60 80 100 ambient temperature ta ( c) slew rate srf (v/ s) v dd = 5.0 v v dd = 3.0 v v dd = 1.8 v v dd = 5.0 v v dd = 3.0 v v dd = 1.8 v ta = 25 c v dd = 3.0 v v dd = 3.0 v ta = 25 c v dd = 3.0 v r l = 1 m ? c l = 20 pf ta = 25 c v dd = 3.0 v r l = 1 m ? c l = 20 pf
ha1630q01/02/03 series rev.1.00 mar 10, 2006 page 9 of 23 figure 1-21. ha1630q01 voltage output p-p vs. frequency 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 100 1k 10k 100k 1m frequency f (hz) output voltage vout p-p (v) figure 1-22. ha1630q01 voltage noise density vs. frequency voltage noise density (nv/ hz ) 100 200 0 frequency f (hz) 100 10k gain = 40 db, v p-p = 0.03 v gain = 20 db, v p-p = 0.3 v gain = 0 db, v p-p = 2.5 v ta = 25 c v dd = 3.0 v
ha1630q01/02/03 series rev.1.00 mar 10, 2006 page 10 of 23 main characteristics (ha1630q02) figure 2-1. ha1630q02 supply current vs. supply voltage 0 40 80 120 160 200 123456 supply voltage v dd (v) supply current i dd ( a) figure 2-3. ha1630q02 output high voltage vs. output source current 0 1 2 3 4 5 6 020 10 40 30 50 60 output source current i osource ( a) output high voltage v oh (v) v dd = 5.0 v v dd = 3.0 v v dd = 1.8 v ta = 25 c ta = 25 c v dd = 5.0 v v dd = 3.0 v v dd = 1.8 v figure 2-5. ha1630q02 output source current vs. ambient temperature 0 20 40 60 80 100 ? 40 ? 20 0 20 40 60 80 100 ambient temperature ta ( c) output source current i osource ( a) figure 2-2. ha1630q02 supply current vs. ambient temperature 0 40 80 120 160 200 ? 40 ? 20 0 20 40 60 80 100 ambient temperature ta ( c) supply current i dd ( a) v dd = 5.0 v v dd = 3.0 v v dd = 1.8 v r l = 1 m ? r l = 120 k ? ta = 25 c figure 2-4. ha1630q02 output high voltage vs. supply voltage 1 2 3 4 5 6 123456 supply voltage v dd (v) output high voltage v oh (v)
ha1630q01/02/03 series rev.1.00 mar 10, 2006 page 11 of 23 figure 2-6. ha1630q02 output low voltage vs. output sink current 0 0.5 1.0 1.5 2.0 0 0.5 1.5 1.0 output sink current i osink (ma) output low voltage v ol (v) v dd = 5.0 v v dd = 3.0 v v dd = 3.0 v v dd = 1.8 v figure 2-8. ha1630q02 input offset voltage distribution 0 10 20 30 40 50 ? 4 ? 3 ? 2 ? 10 1 2 3 4 input offset voltage v io (mv) percentage (%) figure 2-10. ha1630q02 input offset voltage vs. ambient temperature ? 4 ? 3 ? 2 ? 1 0 1 2 3 4 ? 40 ? 20 0 20 40 60 80 100 ambient temperature ta ( c) input offset voltage v io (mv) v dd = 5.0 v, v in = 2.5 v v dd = 1.8 v, v in = 0.9 v v dd = 3.0 v, v in = 1.5 v figure 2-7. ha1630q02 output sink current vs. ambient temperature 0 0.5 1.0 1.5 2.5 2.0 ? 40 ? 20 0 20 40 60 80 100 ambient temperature ta ( c) output sink current i osink (ma) v dd = 5.0 v v dd = 3.0 v v dd = 1.8 v figure 2-9. ha1630q02 input offset voltage vs. supply voltage ? 4 ? 3 ? 2 ? 1 0 1 2 3 4 12 34 56 supply voltage v dd (v) input offset voltage v io (mv) ta = 25 c v in = 0.5 v figure 2-11. ha1630q02 common mode input voltage vs. ambient temperature ? 1.0 0 1.0 2.0 3.0 ? 40 ? 20 0 20 40 60 80 100 ambient temperature ta ( c) common mode input voltage v cm (v) ta = 25 c v dd = 3.0 v
ha1630q01/02/03 series rev.1.00 mar 10, 2006 page 12 of 23 figure 2-14. ha1630q02 open loop voltage gain and phase angle vs. frequency ? 40 ? 20 0 20 40 60 80 100 frequency f (hz) open loop voltage gain a vol (db) ? 90 ? 45 0 45 90 135 180 225 phase angle (deg) figure 2-13. ha1630q02 common mode rejection ratio vs. frequency 0 20 40 60 80 100 120 frequency f (hz) common mode rejection ratio cmrr (db) figure 2-12. ha1630q02 power supply rejection ratio vs. frequency 0 20 40 60 80 100 120 10 100 1k 10k 100k 1m 10 100 1k 10k 100k 1m 10 100 1k 10k 100k 1m 10m frequency f (hz) power supply rejection ratio psrr (db) ta = 25 c v dd = 3.0 v r l = 1 m ? c l = 20 pf ta = 25 c v dd = 3.0 v r l = 1 m ? c l = 20 pf ta = 25 c v dd = 3.0 v r l = 1 m ? c l = 20 pf open loop voltage gain phase angle phase margin: 50 deg
ha1630q01/02/03 series rev.1.00 mar 10, 2006 page 13 of 23 figure 2-15. ha1630q02 input bias current vs. ambient temperature ? 200 ? 100 0 100 200 0 25 50 75 100 ambient temperature ta ( c) input bias current i ib (pa) figure 2-16. ha1630q02 input bias current vs. input voltage ? 200 ? 100 0 100 200 0 0.5 1.0 1.5 2.0 2.5 3.0 input voltage v in (v) input bias current i ib (pa) figure 2-20. ha1630q02 small signal transient response figure 2-19. ha1630q02 large signal transient response figure 2-17. ha1630q02 slew rate (rising) vs. ambient temperature 0.3 0.5 0.4 0.6 0.7 0.8 ? 40 ? 20 0 20 40 60 80 100 ambient temperature ta ( c) slew rate srr (v/ s) figure 2-18. ha1630q02 slew rate (falling) vs. ambient temperature 0.3 0.5 0.4 0.6 0.7 0.8 ? 40 ? 20 0 20 40 60 80 100 ambient temperature ta ( c) slew rate srf (v/ s) v dd = 5.0 v v dd = 3.0 v v dd = 1.8 v v dd = 5.0 v v dd = 3.0 v v dd = 1.8 v ta = 25 c v dd = 3.0 v v dd = 3.0 v ta = 25 c v dd = 3.0 v r l = 1 m ? c l = 20 pf ta = 25 c v dd = 3.0 v r l = 1 m ? c l = 20 pf
ha1630q01/02/03 series rev.1.00 mar 10, 2006 page 14 of 23 figure 2-21. ha1630q02 total harmonic distortion + noise vs. output voltage p-p 0.001 0.01 0.1 1 10 0 0.5 1.0 1.5 2.0 2.5 3.0 output voltage vout p-p (v) t.h.d. + noise (%) v dd = 3.0 v ta = 25 c gain = 0 db f = 10 khz f = 100 hz f = 1 khz v dd = 3.0 v ta = 25 c gain = 40 db f = 10 khz f = 100 hz f = 1 khz figure 2-22. ha1630q02 total harmonic distortion + noise vs. output voltage p-p 0.001 0.01 0.1 1 10 0 0.5 1.0 1.5 2.0 2.5 3.0 output voltage vout p-p (v) t.h.d. + noise (%) figure 2-23. ha1630q02 voltage output p-p vs. frequency 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 100 1k 10k 100k 1m frequency f (hz) voltage output vout p-p (v) gain = 40 db, vp-p = 0.03 v gain = 20 db, vp-p = 0.3 v gain = 0 db, vp-p = 2.5 v ta = 25 c v dd = 3.0 v figure 2-24. ha1630q02 voltage noise density vs. frequency voltage noise density (nv/ hz ) 100 200 0 frequency f (hz) 100 10k
ha1630q01/02/03 series rev.1.00 mar 10, 2006 page 15 of 23 main characteristics (ha1630q03) figure 3-1. ha1630q03 supply current vs. supply voltage 0 100 200 300 400 123456 supply voltage v dd (v) supply current i dd ( a) figure 3-3. ha1630q03 output high voltage vs. output source current 0 1 2 3 4 5 6 0 50 100 150 output source current i osource ( a) output high voltage v oh (v) v dd = 5.5 v v dd = 3.0 v v dd = 1.8 v ta = 25 c ta = 25 c v dd = 5.0 v v dd = 3.0 v v dd = 1.8 v figure 3-5. ha1630q03 output source current vs. ambient temperature 0 50 100 150 200 ? 40 ? 20 0 20 40 60 80 100 ambient temperature ta ( c) output source current i osource ( a) figure 3-2. ha1630q03 supply current vs. ambient temperature 0 100 200 300 400 ? 40 ? 20 0 20 40 60 80 100 ambient temperature ta ( c) supply current i dd ( a) v dd = 5.0 v v dd = 3.0 v v dd = 1.8 v r l = 1 m ? r l = 51 k ? ta = 25 c figure 3-4. ha1630q03 output high voltage vs. supply voltage 1 2 3 4 5 6 123456 supply voltage v dd (v) output high voltage v oh (v)
ha1630q01/02/03 series rev.1.00 mar 10, 2006 page 16 of 23 figure 3-6. ha1630q03 output low voltage vs. output sink current 0 0.5 1.0 1.5 2.0 0 0.5 1.0 1.5 output sink current i osink (ma) output low voltage v ol (v) v dd = 5.0 v v dd = 3.0 v v dd = 3.0 v v dd = 1.8 v figure 3-8. ha1630q03 input offset voltage distribution 0 10 20 30 40 50 ? 4 ? 3 ? 2 ? 10 1 2 3 4 input offset voltage v io (mv) percentage (%) figure 3-10. ha1630q03 input offset voltage vs. ambient temperature ? 4 ? 3 ? 2 ? 1 0 1 2 3 4 ? 40 ? 20 0 20 40 60 80 100 ambient temperature ta ( c) input offset voltage v io (mv) v dd = 5.0 v, v in = 2.5 v v dd = 1.8 v, v in = 0.9 v v dd = 3.0 v, v in = 1.5 v figure 3-7. ha1630q03 output sink current vs. ambient temperature 0 0.5 1.0 1.5 2.5 2.0 ? 40 ? 20 0 20 40 60 80 100 ambient temperature ta ( c) output sink current i osink (ma) v dd = 5.0 v v dd = 3.0 v v dd = 1.8 v v cm (high) v cm (low) figure 3-9. ha1630q03 input offset voltage vs. supply voltage ? 4 ? 3 ? 2 ? 1 0 1 2 3 4 123456 supply voltage v dd (v) input offset voltage v io (mv) ta = 25 c v in = 0.5 v figure 3-11. ha1630q03 common mode input voltage vs. ambient temperature ? 1.0 0 1.0 2.0 3.0 ? 40 ? 20 0 20 40 60 80 100 ambient temperature ta ( c) common mode input voltage v cm (v) ta = 25 c v dd = 3.0 v
ha1630q01/02/03 series rev.1.00 mar 10, 2006 page 17 of 23 figure 3-14. ha1630q03 open loop voltage gain and phase angle vs. frequency ? 40 ? 20 0 20 40 60 80 100 frequency f (hz) open loop voltage gain a vol (db) ? 90 ? 45 0 45 90 135 180 225 phase angle (deg) figure 3-13. ha1630q03 common mode rejection ratio vs. frequency 0 20 40 60 80 100 120 frequency f (hz) common mode rejection ratio cmrr (db) figure 3-12. ha1630q03 power supply rejection ratio vs. frequency 0 20 40 60 80 100 120 10 100 1k 10k 100k 1m 10 100 1k 10k 100k 1m 10 100 1k 10k 100k 1m 10m frequency f (hz) power supply rejection ratio psrr (db) ta = 25 c v dd = 3.0 v r l = 1 m ? c l = 20 pf ta = 25 c v dd = 3.0 v r l = 1 m ? c l = 20 pf ta = 25 c v dd = 3.0 v r l = 1 m ? c l = 20 pf open loop voltage gain phase angle phase margin: 50 deg
ha1630q01/02/03 series rev.1.00 mar 10, 2006 page 18 of 23 figure 3-15. ha1630q03 input bias current vs. ambient temperature ? 200 ? 100 0 100 200 0 20 40 60 80 100 ambient temperature ta ( c) input bias current i ib (pa) figure 3-16. ha1630q03 input bias current vs. input voltage ? 200 ? 100 0 100 200 0 0.5 1.0 1.5 2.0 2.5 3.0 input voltage v in (v) input bias current i ib (pa) figure 3-20. ha1630q03 small signal transient response figure 3-19. ha1630q03 large signal transient response figure 3-17. ha1630q03 slew rate (rising) vs. ambient temperature 0 0.6 0.3 0.9 1.2 1.5 ? 40 ? 20 0 20 40 60 80 100 ambient temperature ta ( c) slew rate srr (v/ s) figure 3-18. ha1630q03 slew rate (falling) vs. ambient temperature 0 0.6 0.3 0.9 1.2 1.5 ? 40 ? 20 0 20 40 60 80 100 ambient temperature ta ( c) slew rate srf (v/ s) v dd = 5.0 v v dd = 3.0 v v dd = 1.8 v v dd = 5.0 v v dd = 3.0 v v dd = 1.8 v ta = 25 c v dd = 3.0 v v dd = 3.0 v ta = 25 c v dd = 3.0 v r l = 1 m ? c l = 20 pf ta = 25 c v dd = 3.0 v r l = 1 m ? c l = 20 pf
ha1630q01/02/03 series rev.1.00 mar 10, 2006 page 19 of 23 figure 3-21. ha1630q03 total harmonic distortion + noise vs. output voltage p-p 0.001 0.01 0.1 1 10 0 0.5 1.0 1.5 2.0 2.5 3.0 output voltage vout p-p (v) t.h.d. + noise (%) v dd = 3.0 v ta = 25 c gain = 0 db f = 10 khz f = 100 hz f = 1 khz v dd = 3.0 v ta = 25 c gain = 40 db f = 10 khz f = 100 hz f = 1 khz figure 3-22. ha1630q03 total harmonic distortion + noise vs. output voltage p-p 0.001 0.01 0.1 1 10 0 0.5 1.0 1.5 2.0 2.5 3.0 output voltage vout p-p (v) t.h.d. + noise (%) figure 3-23. ha1630q03 voltage output p-p vs. frequency 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 100 1k 10k 100k 1m frequency f (hz) voltage output vout p-p (v) gain = 40 db, vp-p = 0.03 v gain = 20 db, vp-p = 0.3 v gain = 0 db, vp-p = 2.5 v ta = 25 c v dd = 3.0 v figure 3-24. ha1630q03 voltage noise density vs. frequency voltage noise density (nv/ hz ) 100 200 0 frequency f (hz) 100 10k
ha1630q01/02/03 series rev.1.00 mar 10, 2006 page 20 of 23 test circuits measure v o corresponding to v dd1 = 1.8 v and v dd2 = 5.5 v 1. power supply rejection ratio, psrp & voltage offset, v io 2. supply current, i dd 3. input bias current, i ib 4. output high voltage, v oh 5. output low voltage, v ol r l = 1 m ? v in1 = v dd / 2 ? 0.05 v v in2 = v dd / 2 + 0.05 v ? + a v dd v dd 2 ? + a v dd v dd 2 ? + v dd v o v dd 2 r s r s r f v io v oh r l = 1 m ? v in1 = v dd / 2 + 0.05 v v in2 = v dd / 2 ? 0.05 v v ol psrr = ? 20log r s r s + r f v o1 ? v o2 v dd1 ? v dd2 v io = v o ? r s + r f r s 2 v dd psrr ? + v dd v o v in1 v in2 r l ? + v dd v o v in1 v in2 r l
ha1630q01/02/03 series rev.1.00 mar 10, 2006 page 21 of 23 measure v o corresponding to v in1 = 0 v and v in2 = 2.1 v 6. output source current, i osource & output sink current, i osink 7. common mode input voltage, v cm & common mode rejection ratio, cmrr 10. gain, a v & phase, gbw 8. total harmonic distortion, thd 9. slew rate, sr gain variable 1 + r f / r s = 100 freq = 100 hz, 1 khz, 10 khz thd v o = v dd ? 0.5 v v in1 = v dd / 2 ? 0.05 v v in2 = v dd / 2 + 0.05 v i osource v o = + 0.5 v v in1 = v dd / 2 + 0.05 v v in2 = v dd / 2 ? 0.05 v i osink cmrr = ? 20log r s r s + r f v o1 ? v o2 v in1 ? v in2 cmrr ? + v dd v o v in1 v in2 a ? + v dd v o v dd 2 r s v in r s r f r f ? + v dd v ss v o gain variable v in r s r f ? + v dd v ss v o 20 pf 1 m ? gain = +1 v in ? + v dd v ss v o r s r s r f ? + v dd v ss v o 20 pf 1 m ?
ha1630q01/02/03 series rev.1.00 mar 10, 2006 page 22 of 23 package dimensions 0.83 0.10 0.65 6.20 6.60 0.20 0.15 a 1 5.30 max nom min dimension in millimeters symbol reference 1.10 0.6 0.5 0.4 4.40 0.10 0.07 0.03 0.25 0.20 0.15 0.10 6.40 8 0 0.13 1.0 5.00 l 1 z h e y x c b p a 2 e d b 1 c 1 e e l a index mark f * 1 * 2 * 3 p m x y 1 e 7 14 8 b z e h d a p terminal cross section ( ni/pd/au plating ) b c 1 1 detail f a l l note) 1. dimensions" * 1 (nom)"and" * 2" do not include mold flash. 2. dimension" * 3"does not include trim offset. p-tssop14-4.4x5-0.65 0.05g mass[typ.] ttp-14dv ptsp0014ja-b renesas code jeita package code previous code
ha1630q01/02/03 series rev.1.00 mar 10, 2006 page 23 of 23 taping & reel specification package code package ordering unit w p ao ko e f maximum storage no. tssop-14 tssop-14 8 1.5 1.6 2,000 pcs/reel w1 w2 17.4 13.4 2,000 pcs 12 tape width [taping] [reel] [ordering information] 12 6.5 5.1 ? 5.5 bo d1 1.5 4.0 2.0 a b p 0 0 1 d w f 1.75 k 0 cover tape tape withdraw direction 13.4 2.0 2.0 330 10 13.0 0.5 17.4 unit: mm mark indication (1) 14 17 8 (2) (3) (4) (5) (6) (7) (10) (11) (8) (9) (12) (1) to (4) week code (5),(8) to (10) space (6), (7) (11), (12) product name 0q01 ha1630q01 0q02 ha1630q02 0q03 ha1630q03 index hole
keep safety first in your circuit designs! 1. renesas technology corp. puts the maximum effort into making semiconductor products better and more reliable, but there is a lways the possibility that trouble may occur with them. trouble with semiconductors may lead to personal injury, fire or property damage. remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placeme nt of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. notes regarding these materials 1. these materials are intended as a reference to assist our customers in the selection of the renesas technology corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to renesas t echnology corp. or a third party. 2. renesas technology corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. all information contained in these materials, including product data, diagrams, charts, programs and algorithms represents i nformation on products at the time of publication of these materials, and are subject to change by renesas technology corp. without notice due to product improvement s or other reasons. it is therefore recommended that customers contact renesas technology corp. or an authorized renesas technology corp. product distrib utor for the latest product information before purchasing a product listed herein. the information described here may contain technical inaccuracies or typographical errors. renesas technology corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies o r errors. please also pay attention to information published by renesas technology corp. by various means, including the renesas techn ology corp. semiconductor home page (http://www.renesas.com). 4. when using any or all of the information contained in these materials, including product data, diagrams, charts, programs, a nd algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. renesas technology corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. renesas technology corp. semiconductors are not designed or manufactured for use in a device or system that is used under ci rcumstances in which human life is potentially at stake. please contact renesas technology corp. or an authorized renesas technology corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerosp ace, nuclear, or undersea repeater use. 6. the prior written approval of renesas technology corp. is necessary to reprint or reproduce in whole or in part these materi als. 7. if these products or technologies are subject to the japanese export control restrictions, they must be exported under a lic ense from the japanese government and cannot be imported into a country other than the approved destination. any diversion or reexport contrary to the export control laws and regulations of japan and/or the country of destination is prohibited. 8. please contact renesas technology corp. for further details on these materials or the products contained therein. sales strategic planning div. nippon bldg., 2-6-2, ohte-machi, chiyoda-ku, tokyo 100-0004, japan http://www.renesas.com refer to " http://www.renesas.com/en/network " for the latest and detailed information. renesas technology america, inc. 450 holger way, san jose, ca 95134-1368, u.s.a tel: <1> (408) 382-7500, fax: <1> (408) 382-7501 renesas technology europe limited dukes meadow, millboard road, bourne end, buckinghamshire, sl8 5fh, u.k. tel: <44> (1628) 585-100, fax: <44> (1628) 585-900 renesas technology (shanghai) co., ltd. unit 204, 205, aziacenter, no.1233 lujiazui ring rd, pudong district, shanghai, china 200120 tel: <86> (21) 5877-1818, fax: <86> (21) 6887-7898 renesas technology hong kong ltd. 7th floor, north tower, world finance centre, harbour city, 1 canton road, tsimshatsui, kowloon, hong kong tel: <852> 2265-6688, fax: <852> 2730-6071 renesas technology taiwan co., ltd. 10th floor, no.99, fushing north road, taipei, taiwan tel: <886> (2) 2715-2888, fax: <886> (2) 2713-2999 renesas technology singapore pte. ltd. 1 harbour front avenue, #06-10, keppel bay tower, singapore 098632 tel: <65> 6213-0200, fax: <65> 6278-8001 renesas technology korea co., ltd. kukje center bldg. 18th fl., 191, 2-ka, hangang-ro, yongsan-ku, seoul 140-702, korea tel: <82> (2) 796-3115, fax: <82> (2) 796-2145 renesas technology malaysia sdn. bhd unit 906, block b, menara amcorp, amcorp trade centre, no.18, jalan persiaran barat, 46050 petaling jaya, selangor darul ehsan, malaysia tel: <603> 7955-9390, fax: <603> 7955-9510 renesas sales offices ? 200 6. re nesas technology corp ., all rights reser v ed. printed in ja pan. colophon .6.0

▲Up To Search▲

Price & Availability of HA1630Q03T

	To Download HA1630Q03T Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .